SWII-42 Headers
3-1/2" Flange
@ 115% and 125%

	Maximum Uniform Roof Load Pounds per lineal foot (PLF)
	7-1/4" SWII-42			9-1/4" SWII-42			11-1/4" SWII-42
Span (ft.)	Defl.	Total Load		Defl.	Total Load		Defl.	Total Load
	L/240	@ 115%	@ 125%	L/240	@ 115%	@ 125%	L/240	@ 115%	@ 125%
4 5 6 7 8 9 10 11 12 13 14 15 16	- - - - - - - - - 119 97 79 66	634 513 430 365 282 224 182 152 128 109 94 83 72	688 557 468 396 306 243 198 164 139 119 103 89 79	- - - - - - - - - - - - -	872 705 592 511 397 315 256 213 179 154 133 116 102	947 767 644 555 431 343 279 232 196 167 146 145 126	- - - - - - - - - - - - -	1110 898 754 651 514 408 332 276 233 199 172 151 132	1206 976 820 707 558 444 362 300 253 217 187 163 144

SWII-62 Headers
5-1/2" Flange
@ 115% and 125%

	Maximum Uniform Roof Load Pounds per lineal foot (PLF)
	7-1/4" SWII-62			9-1/4" SWII-62			11-1/4" SWII-62
Span (ft.)	Defl.	Total Load		Defl.	Total Load		Defl.	Total Load
	L/240	@ 115%	@ 125%	L/240	@ 115%	@ 125%	L/240	@ 115%	@ 125%
4 5 6 7 8 9 10 11 12 13 14 15 16	- - - - - - - - - 180 146 120 100	634 513 430 371 327 291 262 238 200 171 148 129 114	688 557 468 403 355 316 285 258 218 186 161 141 124	- - - - - - - - - - - - -	872 705 592 511 448 400 361 329 283 241 209 183 161	947 767 644 555 488 435 393 358 307 263 227 198 175	- - - - - - - - - - - - -	1110 898 754 651 572 509 460 419 366 313 270 236 208	1206 976 820 707 621 554 500 456 398 340 294 257 226

NOTES:

1. Minimum bearing width is 1-1/2", 3" bearing is recommended.
2. 3" bearing is required on all SWI-Headers 6'-0" long and greater.
3. WARNING: No holes allowed in Header webs. DO NOT CUT FLANGES.
4. Top and bottom flanges must be laterally restrained at all supports.
5. Load tables are for simple spans and uniformly distributed loads only. For multiple spans, concentrated loads, etc., contact Superior Wood Systems

Home